Installation And Instruction - Aqua Marina BLUEDRIVE S POWER FIN Guide De L'utilisateur

1. Open the packing box and check whether the components are complete
2. Install power fin (As shown in the picture)
2.1 Insert the bottom of power fin into the fin base;
2.2 Insert the slide in push-in pin into the fin base;
* With a US Fin adaptor, the power fin can be also used on any watercrafts with a US FIN
box.
3. Install the control box
Firstly check whether the control box is with electricity (please refer to the manual of
Magnetic Switch for details). If it is without or lack of electricity, please charge the control box
in following steps. (As shown in following pictures)
a

INSTALLATION AND INSTRUCTION

2.1
d
b
9
Insert push-in pin Insert push-in pin
2.2
Plug in
four core
c