6. Magnetic Switch Cord
6.1 The magnetic switch cord is a 2-in-1 design, working as both power switch and emergency
stop switch.
6.2 For standby mode, snap the magnetic switch in the right position of the control box, and the
indicator light will flash blue for 5 times and turn solid blue to display the remaining battery.
The remaining battery is roughly indicated by the number of dots: 4-dot for nearly 100%
battery, 3-dot for nearly 75% battery and so on.
6.3 To shut the battery off, pull out the magnetic switch directly.
6.4 Before each use, always connect the magnetic switch cord with the safety leash. If the red
pull cord is removed from the control box in emergency, the motor will immediately stop to
avoid any danger.
7. How to Remove Li-ion Battery
7.1 The battery must be removed from the appliance before it is discarded.
7.2 To remove the Li-ion battery, firstly remove 5 screws from bottom base. Then remove 8
screws from the back cover, and the Li-ion battery pack could be easily separated from the
control box.
6.2
12
6.4