Battery System Standard - Topdon BT300P Mode D'emploi

*Please note that the printer only works when the
battery's voltage is above 9.5V.
7. Replace Printer Paper
This battery tester comes with three rolls of printer
paper, of which one is installed in the tester and the
other two are in the box. Please follow the diagram
below to replace the paper roll.
EN I 16
Note:
The direction of the printer paper must be followed in
order, otherwise it will not be able to print the content.

BATTERY SYSTEM STANDARD

DESCRIPTION
The battery tester analyzer will test each battery
according to the selected system and rating.
Cold Cranking Amps, specified by SAE & BCI, most
CCA
frequently used value for starting battery at 0°F
(-18°C)
BCI Battery Council International standard
Cranking Amps standard, effective starting current
CA
value at 0°C
Marine Cranking Amps standard, effective starting
MCA
current value at 0°C
Japan Industrial Standard, displayed on the battery
JIS as combination of the numbers and letters, e.g.
55D23, 80D26
DIN German Auto Industry Committee Standard
IEC International Electro Technical Commission Standard
EN European Automobile Industry Association Standard
SAE Society of Automotive Engineers Standard
GB China National Standard
EN I 17