Hkoenig mx15 Manuel D'instructions page 3

8. Always disconnect the blender from the supply if it is left
unattended and before assembling, disassembling or
cleaning; If the supply cord or plug is damaged, it must
be replaced by manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
9. Do not operate the appliance, if power cable or the mains
plug shows damage or the unit falls to the floor or has
been damaged otherwise. In such cases, bring the unit
to the workshop for checking and repairs, if necessary.
10. Do not ever try to repair the unit yourselves. There is
danger from electrical shock!
11. Do not let the power cord hang over sharp edges and
keep it away from hot objects and open flames. Pull the
plug itself to remove it from the plug socket.
12. Installation of a spike protector will offer additional
protection with a nominal trigger current of not more than
30 Ma in the house installation. Please consult your
installing electrician.
13. The cable as well any extension cable required should
be laid such that there will not be any risk of anyone
pulling it inadvertently or tripping over it.