Hkoenig optiV8 Manuel D'instructions page 6

Fabric Setting Chart
Temperature
DRY
Setting
Synthetics,
Fabric
Silk,
Arcrylic,
Acetate
lroning Dry lroning
Instruction
/
Steam
Selection
Ironing Temperature Setting Guide
Follow up the ironing instructions on the garment label. If there is not any instruction label,
1.
but you know what kind of the fabric is, please refer to the fabric setting chart described in this
instruction manuai.
The fabric setting chart is only validfor plain fabrics and not for materials to which finishes,
2.
glosses etc., have been applied. Textile to which some kind of finish has been applied (gloss,
crinkle, relief etc.) is best ironed at lower temperature
First sort laundry according to ironing temperature setting guide: wool with wool, cotton with
3.
cotton, etc.
The iron heats up more quickly than it cools down. Therefore, start ironing articles that need
4.
to be ironed at the lowest temperature, such as those made of synthetic fibres.
If you do not know what kind of fabric the article is made of, iron a piece of the material which is not
5.
visible when you wear to find out the appropriate temperature for your articles.
When steam ironing woollen fabrics, shiny patches may occur. You may prevent this by turning the
6.
article inside out and ironing the reverse side.
After using of steam ironing for cotton fabrics, do not iron articles required by lower temperature
7.
(such as nylon etc.) immediately.lt is advisable to adjust the selection button to the lower setting, waiting
for about 2-4 minutes till the blue indicator light turn off, and then you can start ironing.
IMPORTANT HINTS:
Do not fill water tank with vinegar, perfume, starch, chemically descaled water or descaling agents.
ECO STEAM
Synthetic, Wool
Nylon, Polyester
Steam
lroning
SUPREME STEAM
Polyester Cotton
Linen
Wool
Steam lroning