EINHELL GE-CG 18/100 Li T Instructions D'origine page 21

7. Cleaning, maintenance and
ordering of spare parts
Danger! Remove the rechargeable battery!
7.1 Cleaning
•
Keep all safety devices, air vents and the mo-
tor housing free of dirt and dust as far as pos-
sible. Wipe the equipment with a clean cloth
or blow it with compressed air at low pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth. Do not use cleaning agents or solvents;
these could attack the plastic parts of the
equipment. Ensure that no water can seep
into the device. The ingress of water into an
electric tool increases the risk of an electric
shock.
•
The shears should be cleaned thoroughly
every time before and after use. A few drops
of oil (for example sewing machine oil) ap-
plied to the blades improve the cutting perfor-
mance. However, never apply grease to the
blades.
•
To guarantee a constant exact cut it is ne-
cessary that grass residues and dirt are also
removed from the top and bottom blades.
Caution!
Because of the risk of injury or damage to
property, never clean the product with run-
ning water, especially not with a pressure
hose. Store the cordless shears in a dry and
frost-free location. The storage place must be
inaccessible to children.
7.2 Maintenance
•
For good cutting performance the blades
should always be sharp. They can be therefo-
re be resharpened with a whetstone. In parti-
cular we recommend to remove notches and
ridges which are produced on the blades by
stones or the like.
•
There are no other parts inside the equipment
which require maintenance.
GB
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
•
•
•
For our latest prices and information please go to
www.Einhell-Service.com
8. Disposal and recycling
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
9. Storage and transport
Remove the rechargeable battery. Store the
equipment and its accessories in a dark and dry
place at above freezing temperature. The ideal
storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
•
•
•
•
10. Faults
The equipment does not work
•
•
If the equipment will not work in spite of the volta-
ge supply being OK, please send it to the custo-
mer service address below.
- 21 -
www.sidirika-nikolaidi.gr
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
Always hold the equipment on the handle,
Secure the equipment against slipping if you
transport it in a vehicle.
As far as possible, use the original packaging
for transporting the equipment.
Use a transport guard for the grass and shrub
shears.
Check that the battery is charged (push but-
ton „B" on the battery) and whether the char-
ging unit is working.
Check that the rechargeable battery is pu-
shed fully into the battery mount on the equip-
ment/long handle and is locked in position.