Troubleshooting; Specifications - Royal Sovereign PL-910 Manuel Du Propriétaire

TROUBLESHOOTINg

Symptom
Motor does not work.
Pouches are not laminating correctly.
The machine is beeping and the pouch
is returning out of the front of the
machine.
The rollers are moving, but the
laminated item is not.
If you are still having complications, please contact Royal Sovereign's Service Center at 1-800-397-1025.

SPECIFICATIONS

Model
Dimensions
Maximum laminating width
Maximum laminating thickness
Film thickness
Number of rollers
Cold mode
Heating system
Ready time
Motor type
Laminating speed
Weight
Voltage/Cycle
Power consumption
Check to make sure machine is plugged in. Check to make sure the power button is turned on.
Make sure that the machine is set to the correct setting. The setting should be the same as
the thickness of the pouch you are using. Ex.75 mic pouch film should be set to 3 mil setting.
The automatic reverse function has turned on to retrieve the item. The item you are laminating
may be jammed or too large to pass the rollers. Wait for the pouch to exit the front of the
machine. You can try laminating again after 15 seconds.
Hold down the reverse button until the entire pouch has exited the front of the machine. You
can try laminating again after 15 seconds.
PL-910
17.6x7.3x4.6 in
448x186x118 mm
9 " / 235 mm
8.4 lbs / 3.8 kg
450 W
7
PL-910/1310
Solution
PL-1310
21.6x7.3x4.6 in
548x186x118 mm
13"/ 340 mm
27.6 mil / 0.7 mm
3~10 mil / 75~250 micron
4
Yes
Hot shoe
4 min
AC motor
20" per min. / 430 mm per min.
15.4 lbs / 7 kg
120V, 60Hz
730 W