Troubleshooting - Royal Sovereign IL-926W Manuel Du Propriétaire

PRODUCT OPERATION
5. The document or photo will then automatically feed out through the back of the machine.
NOTE: Laminated items exiting the machine may be too hot to touch.
6. If the item is not completely laminated, repeat steps 4-5.
NOTE: For Hot lamination, laminated items will be hot and will easily bend. To keep the item flat,
place on a flat surface and allow to cool.
7. If you turn the unit off, the fan will continue to run to cool down the laminator. The fan will
automatically turn off when the unit is cool. This will take approximately 15 - 20 minutes.

TROUBLESHOOTING

Symptom
Motor does not work
Pouches are not laminating
correctly
The rollers are moving, but
the laminate item is not
(Machine is jammed)
NOTE: For all replacements and repairs that need to be made, contact Royal Sovereign Customer Service at +1) 800-397-1025
6
Solutions
• Check to make sure the machine is plugged in.
• Check to make sure the power button is turned on.
• Make sure that the machine is set to the correct Mil setting.
• Press the jam release button on the back of the unit and pull out the pouch
through the front by hand. Try laminating again after 8 seconds.