Assembling The Feet - NewAge Products BOLD 3.0 Mode D'emploi

48" casier sans outils
Masquer les pouces Voir aussi pour BOLD 3.0:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembling the Feet

Screw in the Spring Pull Pins into the four locations on the bottom panel.
1
Then slide feet into bottom base foot slots and hook onto pin.
2
Lift spring pull pin.
Repeat steps 1-3 for all sides.
4
Ensure feet are securely attached.
3
Rotate foot in and release pin.
!
Click
5
Stand & level feet.

Publicité

Table des Matières
loading

Table des Matières