Alarm Mode; Moon Phase - Marathon CL030049 Mode D'emploi

CL030049
USER MANUAL
5. When checking Memory day alarm, press
MODE button to turn on/off Memory
day alarm.
6. When checking Alarm 1 or Alarm 2, press
and hold ALARM button to start setting
the alarm.
7. When checking Memory day alarm, press
and hold ALARM button to start Memory
day setting.
8. Alarm 1 or Alarm 2 setting order is:
Hour → Minute → Exit
9. Memory day setting order is: year à month
à day à hour à minute à exit
10. The item blinking will be the item currently
being set.
11. Press ALARM button to confirm setting and
to go to the next setting item or exit setting.
12. Press UP button, setting item will increase
by one unit.
13. Press and hold UP button, setting item will
increase by 8 units per second.
14. Press DOWN button, setting item will
decrease one unit.
15. Press and hold DOWN, setting item will
decrease 8 units per second.
16. The setting will be exited and data will be
saved when the user does not touch any
button within 30 seconds

MOON PHASE

WEEK COUNT
• Monday is the first day of one week
• If 1st of January is from Monday to Thursday, this week will be counted as the first week of this year.
• If 1st of January is from Friday to Sunday, this week will be counted as the last week of the year.

ALARM MODE

• Alarm, Memory day and Countdown will keep
ringing for 2 minutes
• Alarm sounds as follows:
A.1-8 seconds: 1 Beep / second
B.9-20 seconds: 2 Beeps / second
C.21-59 seconds: 4 Beeps / second
D.60-120 seconds: continuous beeping
• When alarm sounds, press SNOOZE button
to start snooze, pressing other buttons will
stop alarm function.
• When snooze function is activated, pressing
other buttons will turn off snooze function.
• Snooze time is every 5 minutes.
• Snooze will be infinite repeat unless user stops it.
TEMPERATURE
• Temperature range 0°C ~ +50°C.
• Temperature accuracy 0.1.
• When alarm is on or clock is receiving RCC,
stop to inspect and update indoor temperature.
• Temperature over 50° will show "HH.H",
temperatures lower than 0° will show "LL.L"
• At normal display, press UP to switch
temperature unit.
ENGLISH
PG 2