Publicité

Recommandations importantes:
• Déballer les meubles soigneusement en prenant garde de ne pas les rayer avec un cutter.
Inspecter chaque meuble avant l'installation. En cas de problème, le signaler immédiatement à
votre revendeur, aucune réclamation ne sera prise en compte après installation.
• Nous vous conseillons d'utiliser une protection sur le sol de type couverture pour ne pas
risquer de rayer les meubles. Les miroirs et les plans de toilette sont des objets fragiles, il est
recommandé de les poser au sol sur des tasseaux entre chaque manipulation.
• Veiller à réaliser l'étanchéité des plans de toilette à l'aide de silicone sanitaire comme indiqué
dans les notices respectives. Les infi ltrations d'eau à l'arrière des surfaces et plans de toilette
peuvent dégrader irrémédiablement les meubles, ce type de dommage n'est pas couvert par
la garantie.
• Les surfaces des meubles ne doivent pas être exposées longtemps à de l'eau stagnante ou
à une humidité persistante. Elles doivent donc être essuyées rapidement. Aucune réclamation
ne sera prise en compte si le problème provient d'un contact prolongé avec de l'eau (gonfl e-
ment).
• Tous nos meubles bénéfi cient d'une garantie 2 ans* sur les pièces (1 an sur les miroirs, com-
posants électriques, structures de WC et tous les accessoires) aucune réclamation ne pourra
être formulée en cas de non respect des précautions d'usage et d'entretien citées sur ce docu-
ment.
• Nos produits sont vendus pour un usage résidentiel, aucune réclamation ne sera prise en
compte pour une détérioration constatée suite à un usage excessif en collectivité ou lieu
public.
• La garantie 2 ans* n'est valable que dans le cas d'une pose respectant les normes en vigueur,
les recommandations et précautions d'usage fournies pour chaque produit.
• La garantie ne concerne que nos produits et ne couvre en aucun cas les dommages, pertes
et travaux consécutifs, ces derniers restant à la charge du consommateur.
• Nous rappelons à nos usagés que la pose des meubles de salles de bains doit être réalisée
par un professionnel qualifi é. Aucune garantie ne pourra être appliquée en cas de défaut aux
règles de pose indiquées sur chaque notice de meuble.
*Se référer aux conditions générales de ventes
ENTRETIEN :
• Nettoyer la surface du meuble immédiatement après un contact avec un produit chimique :
teintures, solvants, produits pour les ongles, laque...
• Ne pas utiliser de crème abrasive, de paille de fer, d'éponge rugueuse, de solvant ou d'acide.
• Penser à sécher les surfaces avec un chiff on doux après nettoyage.
• Pour les miroirs utiliser une peau de chamois humide et penser à essuyer les arêtes.
• Le nettoyage des parties électriques doit se faire avec un chiff on sec, appareil électrique
hors tension.
LA PRÉSENCE D'UNE VENTILATION EFFICACE DANS LA SALLE DE BAINS EST IMPÉRATIVE
POUR ÉVITER TOUTE HUMIDITÉ PERSISTANTE ET PRÉSERVER LA QUALITÉ DES MEUBLES ET
DES MIROIRS
NORMES ÉLECTRIQUES :
Les meubles équipés de composants électriques (miroirs, armoires de toilette, prises de cou-
rant...) doivent être installés impérativement en ZONE 3 selon VDE 0100, alinéa 701. Le mon-
tage et les interventions éventuelles sur les appareils électriques doivent être réalisées par un
électricien professionnel agréé.
Toutes les infos sont téléchargables sur www.ambiancebain.com
CONTENU DU COLIS DE QUINCAILLERIE / SPARE PART BOX CONTENT
0273
0272
*VÉRIFIER LA QUANTITÉ DANS LE COLIS AVEC LA LISTE
*CHECK SPARE PARTS BOX QUANTITY
C067V1.1
KITOÏ
NOTICE D'INSTALLATION
FITTING INSTRUCTIONS
RECOMMANDATIONS ____________________ PAGE 1
MEUBLES BAS
SOUS VASQUE _______________________ PAGE 2 À 4
MIROIR _____________________________ PAGE 5 À 6
COLONNE _____________________________ PAGE 7
NICHE DÉCO ___________________________ PAGE 8
IMPORTANT _________________________________ PAGE 1
BASIN UNIT _____________________________ PAGE 2 TO 4
MIRROR ________________________________ PAGE 5 TO 6
TALL UNIT __________________________________ PAGE 7
WALL SHELF UNIT ____________________________ PAGE 8
Important :
• Unpack the units carefully ensuring not to scratch them with the knife blade. Inspect every
item carefully before installation as no claim for faults or damages will be accepted once the
item is installed.
• We recommend that you use protection (for example a blanket) to cover the working area.
Mirrors and worktops are very fragile, we recommend that you put them on battens (and
never directly onto the fl oor).
• Our furniture is designed to be fi tted on a level, fl at fi nished wall.
• It is imperative that you use a sanitary grade silicone sealant at the back and sides of every
worktop as water infi ltrations will damage your unit and this is not covered under our product
guarantee.
• All surfaces of all units should not be exposed to standing water or persistent humidity. They
must be wiped and dried off immediately after use. If your unit is not cared for correctly it will
deteriorate and this will not be covered under our product guarantee.
• All our units are guaranteed for 5 years* from date of invoice (1 year for mirrors, electri-
cal items, cisterns, WC frames, sanitary ware, taps and accessories) against all manufacturing
defects acknowledged by our company, limited to domestic users.
• The guarantee does not apply to any products that have been misused or abused in any way.
The products must be installed and cared for in line with our fi tting instructions, local water
byelaws, IEE electrical directives and any other applicable regulations.
• In the unlikely event that the product fails within 5 years* (1 year for mirrors, electrical items,
cisterns, WC frames, sanitary ware, taps and accessories), we off er a free of charge replace-
ment part (or nearest equivalent). Liability is limited to individual products and does not cover
consequential loss/damage or any further unfi tting/refi tting costs or fi nancial compensation.
The customer will be required to pay for the installation cost of the replacement part.
* Upon completion and registration of the enclosed Guarantee card, refer to general terms
of sale
MAINTENANCE:
• Wipe and rinse the surface of the furniture after contact with any chemical product.
• Do not use abrasive cream (cif, etc...), wire wool, scouring pad, solvent, acid, etc...
• Dry the surface off with a soft cloth after cleaning
• For mirrors, use a chamois leather, and dry the edges with a suitable soft cloth.
• Use a dry cloth to clean any electric components, they must be switched off
OUR FURNITURE WILL DETERIORATE THROUGH EXCESSIVE WATER SPILLAGE OR HEAVY
CONDENSATION. IT IS ADVISED THAT EVERY BATHROOM SHOULD BE WELL VENTILATED AND
FITTED WITH A SUITABLE EXTRACTOR FAN TO AVOID ANY PERSISTENT HUMIDITY AND ALL
FURNITURE SHOULD BE PROTECTED WITH BATH/SHOWER SCREEN ENCLOSURES TO PRE-
SERVE THEIR QUALITY.
ELECTRICAL INSTALLATION:
All Ambiance Bain units fi tted with electrical components (mirrors, mirrored cabinets, sockets,
etc...) must only be installed in ZONE 3. Installation and fi tting of all electrical items must be
completed by a qualifi ed electrician. Any fi nal decisions regarding the installation should also
be made by the electrician. All electrical items must be tested prior to installation, as liability is
limited to replacement items only.
All information is downloadable from the website www.ambiancebain.co.uk
MATÉRIEL NÉCESSAIRE / TOOLS REQUIRED
F R
U K

Publicité

Table des Matières
loading

Sommaire des Matières pour AMBIANCE BAIN KITOI

  • Page 1 POUR ÉVITER TOUTE HUMIDITÉ PERSISTANTE ET PRÉSERVER LA QUALITÉ DES MEUBLES ET ELECTRICAL INSTALLATION: DES MIROIRS All Ambiance Bain units fi tted with electrical components (mirrors, mirrored cabinets, sockets, etc...) must only be installed in ZONE 3. Installation and fi tting of all electrical items must be NORMES ÉLECTRIQUES : completed by a qualifi...
  • Page 2 INSTALLATION MEUBLE BAS SOUS VASQUE INSTALLATION OF BASIN UNIT FIXATION DES PATTES MURALES «0271» (vis et chevilles non fournies) FIX THE WALL PLATES «0271» (screws and wall plugs not included) Déterminer la hauteur de Positionner la patte murale Fixer la première patte Placer la deuxième patte murale en pose fi...
  • Page 3 INSTALLATION MEUBLE BAS SOUS VASQUE INSTALLATION OF BASIN UNIT SERRER LES ACCROCHE-MEUBLES POUR FAIRE PLAQUER LE MEUBLE AU MUR ET AJUSTER LES NIVEAUX ADJUST THE LEVELS AND TIGHTEN THE BRACKETS ON THE UNIT SO THAT THE FURNITURE FITS TO THE WALL RETIRER L’ARRIÈRE DÉMONTABLE REMOVE THE REMOVABLE BACK FIXER LES ÉQUERRES DE SUPPORT «0123»...
  • Page 4 INSTALLATION MEUBLE BAS SOUS VASQUE INSTALLATION OF BASIN UNIT RACCORDER LA PLOMBERIE, VÉRIFIER L’ABSENCE DE FUITE CONNECTING THE PLUMBING, CHECK FOR LEAKS Retirer le couvercle Insérer la bonde dans le Visser la bonde au trop trou plein invisible Remove the waste cover Insert the waste into the Tighten the waste to the hole...
  • Page 5: Arrivée Principale

    INSTALLATION MIROIR INSTALLATION OF MIRROR FIXATION DES PATTES MURALES «0276» (vis et chevilles non fournies) FIX THE WALL PLATES «0276» (screws and wall plugs not included) Déterminer la hauteur de pose fi nale Determine the fi nished height Positionner la patte murale (voir schéma), tracer et percer Position the wall plate (see fi...
  • Page 6: Installer L'éclairage En Applique

    INSTALLATION MIROIR INSTALLATION OF MIRROR Cas 2: Pose du miroir avec option d’éclairage en applique Case 2: Installation of mirror with optional top light INSTALLER L’ÉCLAIRAGE EN APPLIQUE INSTALL THE OPTIONAL TOP LIGHT Décrocher le miroir du cadre puis poser le délicatement sur une couvertue Detatch the mirror from the frame then put this on a blanket...
  • Page 7 INSTALLATION COLONNE INSTALLATION OF TALL UNIT FIXATION DES PATTES MURALES «0276» (vis et chevilles non fournies) FIX THE WALL PLATES «0276» (screws and wall plugs not included) Déterminer la hauteur de pose fi nale Determine the fi nished height Positionner la patte murale (voir schéma), tracer et percer On préconise d’aligner le bas des colonnes et demis colonnes Position the wall plate (see fi...
  • Page 8 We recommended to put a silicone spot in each bottom rear corner of the unit www.ambiancebain.com / www.ambiancebain.co.uk AMBIANCE BAIN - BP206 - 07502 Guilherand-Granges Cedex - FRANCE AMBIANCE BAIN UK - 41 - 42 Clarendon Court - Winwick Quay - Warrington...

Table des Matières