Mistral EVOPURE Manuel D'installation page 7

Make sure that the water cooler is switch off.
During water coolers installation, Mistral recommend to replace the water alimentation hou-
sepipe with a new pipe
or to disinfect it with an antibacterial product like SANIPURE® which reduces the risks of
bacterial proliferation. A disinfection of internal pipes is required before installation, or if an
intervention is done on the hydraulic system
(ex: changing filter), or at least once a year.
1. Remove the drip tray (1) and unscrew the 2 screws fixing the front panel (figure1 ).
2. Remove the front panel by pulling its lower part (2) then make the front panel slide downwards (3) (figure2).
3. Remove the cap from the tank and fill the tank with water (figure3).
4. Put the cap back.
5. Filter connection (option - figure 4): Connect the tube (figure 4 (1)) on the filter inlet (rounded part, red nozzle) as shown on the
photo. Connect the stem elbow behind the cooler (this fitting is available in the bag with the pipe & the optional water black) and
connect the water supply pipe to the stem elbow (figure 5). Do not connect the outlet pipe to the filter.
out the filter throught the taps because it will dama ge the solenoid valves.
6. Connect the power cable. Turn on the water supply. Then, flush out the filter until the water is clear (around 10 to 15 liters of wa-
ter) for cook/cold version. For the others versions, press the distributions to open the inlet so lenoid valve.
7. Turn off the water supply. Connect the water tube (figure 4 (2)) on the filter outlet {blue nozzle). Turn on the water supply.
Figure 1
For sparkling and hot version, please refer directly to à la page 9.
When the cooler is on, the 2 indicator lights are flashing (figure 6).
8. Press the cook water button (1 ), then the cold version (2) until the water flows.
9. Replace the front panel and the drip-tray, without forgetting the screw.
10. Remove the protective film of the body.
WARNING : do not damage the refrigerant circuit.
Refrigerant R600A is highly inflammable.
INSTALLATION
For all versions
Figure 2 Figure 3 Figure 4
1
2
Figure 6
7
WARNING : do not flush
Figure 5