Cooking Mode - TecTake 403581 Mode D'emploi

Product operating
After inserting the plug into the socket, a "Beep" will emit and all the indicator flash a time,
indicating the appliance in connection with a power source. At this time, the indicator of [On/Off]
keep flashing. Place a suitable cookware on the center of the cooking zone. The display shows
[----] and indicator of [On/Off] lights up when [On/Off] key is pressed once, the appliance goes to
selection mode. Press the corresponding function keys to start operation. Stop the operation and
switch to standby mode by pressing [On/Off] key after cooking.

3. Cooking Mode

Left cooking zone 2000W
Power: Press the [Menu] key until the indicator of [ Power] lights up, display will show [1600]
representing that the default power is 1600W. User can press [+] or [-] to adjust 10 power levels
from 200W to 2000W. To cancel this mode, user can press other function keys or [On/Off] key to
stop the operation.
Temp.: Press the [Menu] key until the indicator of [ Temp.] lights up, display will show [180˚ ]
representing that the default temperature is 180℃. User can press [+] or [-] to adjust 10
temperature levels from 60℃ to 240℃. To cancel this mode, user can press other function keys
or [On/Off] key to stop the operation.
Right cooking zone 1500W
Power: Press the [Menu] key until the indicator of [Power] lights up, display will show [1200]
representing that the default power is 1200W. User can press [+] or [-] to adjust 10 power levels
from 200W to 1500W. To cancel this mode, user can press other function keys or [On/Off] key to
stop the operation.
Temp.: Press the [Menu] key until the indicator of [Temp.] lights up, display will show [180 ˚ ]
representing that the default temperature is 180℃. User can press [+] or [-] to adjust 10
temperature levels from 60℃ to 240℃. To cancel this mode, user can press other function keys
or [On/Off] key to stop the operation.
Timer function ( For both cooking zone ) :
User can set the cooking time when power mode is selected. Press the [Timer] key once to
access the timer function, the indicator above [Timer] key will light up. Display will show
[00:00], user can press [+] and [-] to set the desired time, 1 minute for one time. To press and
hold [+] or [-] key, user can set the time quickly 10 minutes per one time. The time can be
adjusted from 0 minute to 3 hours. After setting, user can press [Timer] key once to confirm or
wait until the display stop flashing. After the "Beep" signal, the appliance will stop the operation
and change to standby mode automatically when the end of the countdown. To cancel this
function, user can hold the [Timer] key for 3 seconds.
Lock function (For both cooking zone):
To activate the lock, user can press the [Lock] key. This will lock the appliance and all the
function keys are not allowed to operate except key [On/Off]. Hold for 3 seconds to unlock.
instructions
4