Pleasant Hearth TOBACCO COMPACT PHCPD-2T Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
4. Secure the front panel (F) by inserting bolts
(AA) through washers (BB) and into predrilled
holes in the front panel (F) and tightening.
5. Insert 4 dowels (CC) into predrilled holes in
top edge of completed assembly. Slip the top
panel (A) over dowels (CC) until snug. From
underneath the top panel (A), insert bolts (AA)
through washers (BB), through glue blocks,
into predrilled holes in the top panel (A) and
tighten.
6. Lay the corner panel (H) face down on a
smooth, flat surface. Attach the support leg (J)
using a bolt (AA) and washer (BB) as shown
and tightening securely.
4
F
5
A
6
J
5
BB
AA
BB
H
AA
CC
BB
AA