Opale-Paramodels Mike XL Mode D'emploi page 17

Pilot composition
Included in the purchase of your Pilot Mike XL:
- GFK fiber body
- Hardware kit
- a harness
- a flight suit
- a resin head to paint
- a pair of shoes to paint
- a pair of articulated legs
- a pair of hands to paint
- a fixing elastic
- 8 ball bearings
Not included and required for using the pilot:
- A wing of 4 to 5.5m flat wingspan
- Minimum 2x servomotors of size 40x20x40mm 40 to 70kg.cm for the arms ( Ref OPS6720BLS / OPS-
4720BLS)
- a receiver
- a reception battery (to be adapted according to your servomotors)
- 0.5 to 5kg of ballast depending on weather conditions
The Mike XL pilot can be used in 3 different scenarios, please refer to the additional instructions for the
corresponding instructions.
- Mike XL "Paragliding"
- Mike XL "Paraglider with auxiliary motorization"
- Mike XL "Paramotor with Backpack XL2"
O pal e - Pa ramo del s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
17
contact@opale-paramodels.com +33(0)981 144 387