Hella marine 2LT 958 140-5 Serie Instructions De Montage

INSTRUCTION SHEET:
2LT 958 140-5xx
for:
Hella marine LED products offer many advantages over conventional bulb lamps. Significantly reduced power
consumption, ultra long life and high tolerance to shock and vibration make HELLA LED lamps the ideal choice for
the harsh marine environment.
Part Number
Housing Material
Lens Material
Bracket Material
Light Source
Operating Voltage
Light Output
Power Consumption
Blue Edge: 2W
12V: 160mA
24V: 80mA
Cable
Degree of Protection
Weight
Operating
Temperature
Electromagnetic Compatibility (EMC)
This LED lamp is an electronic device. The electrical circuits contain components that suppress possible
interference, both emission as well as susceptibility, to the limits prescribed in international regulations.
Electrical Protection
This lamp is protected against overvoltage, voltage spikes and reverse polarity connection.
Part Number Cable colour Connect to
White Negative (-)
2LT 958 140-5xx
Red Positive (+)
Black Housing
Brown Positive (+)
Black Negative (-)
2LT 958 140-5xx
Red Positive (+)
White Housing
Blue Positive (+)
LED modules are polarity conscious. Reverse polarity will not damage this product but will inhibit its function. HELLA
recommends wire connections be soldered, and heat shrink tubing applied to seal the joint. Each lamp must be
protected by a fuse rated at 5 amperes maximum.
Please check local laws and requirements before use.
22 PAP
www.hellamarine.com
Sea Hawk-470 with Edge Light
2LT 958 140-5xx
'Non-metal' thermally conductive housing
Heavy duty Grilamid
®
316 Stainless steel
LED
Multivolt 12/24v DC
1700 Lumens (5500K white)
Main Beam: 36W
12V - 2.7A
24V – 1.4A
White Edge: 4W
12V: 300mA
24V: 150mA
Pre-wired with 2.5m tinned marine cable
IP 6K7 IP6K9K (Completely sealed)
1kg
-40°C - 60°C
Consumption Mode
- -
36W Main beam
2W / 4W Blue / White Edge
- -
36W Main beam
2W / 4W Blue / White Edge
Mounting Instructions
Sea Hawk-470 Deck Floodlights are supplied with brackets that require assembly. Before assembly please check that all
components have been supplied and read all instructions prior to installation.
1: Scope of supply
Thumb Knob
1 x 470 Lamp 470 Lamp
(Pre-assembled)
2x 2x 2x
Stainless Steel Brackets
Friction Washer
(Left & Right)
2x
1x 1x
3: Choose a suitable mounting location
45º
25º
Dimensions
528 mm (20.86")
Single Bracket
(included)
460 mm (18.11")
528 mm (20.86")
528 mm (20.86")
Double Bracket
(Optional-
Accessory)
460 mm (18.11")
528 mm (20.86")
www.hellamarine.com
2: Fix bracket to lamp
CAUTION! Use only the M8 x 20mm Hex head bolt provided.
Using a longer bolt may damage the lamp and void warranty.
4: Securely fasten lamp onto desired mounting location.
7mm
(0.27")
7mm
(0.27")
25mm (1")
67 mm (2.64")
34 mm 8 mm
(1.35") (0.3")
73 mm
30 mm
8 mm (0.3")
(1.2")
40 mm (1.6")
Designed and Manufactured in New Zealand
460 965-27 / 09.22