Hella marine NAVILED PRO 2LT 959 941 Serie Manuel D'instructions

Warranty Statement
Congratulations! The product you have selected comes from HELLA – one of the world's
leading manufacturers of lighting products. The product comes with a 5 year warranty from
end user purchase covering faults in materials, components or workmanship.
In the unlikely event that you should experience a confirmed warranty related problem with your
purchase, HELLA will, at its discretion, either repair, replace or refund the purchase price of the
product.
Warranty services may be obtained by returning the product within the warranty period to the
HELLA dealer where the product was originally purchased.
This warranty is in addition to and does not preclude any other rights or remedies available to the
consumer under any local legislation related to the provision of goods or services.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This warranty does not cover:
1.) Claim/s as a result of normal wear and tear or of any modifications and / or alterations to the product in any
shape or form.
2.) Claim/s as a result of non-compliance of the assembly, service and operating instructions and/or any unfit or
improper use.
3.) Any expenses incurred in the process of making the claim.
Note: For lamps sold in Australia, warranty services are provided by Hella Australia Pty Ltd., 4 Hargrave Place,
Mentone, Victoria, 3194 Australia. Customer Service 1800 061 729
https://www.hella.com/hella-au/assets/media_global/IAM_Statement_of_Warranty.pdf
For general comments about HELLA Marine products please e-mail techfeedback@hellamarine.com
NaviLED PRO Bi-Colour Integrated Timer
®
To ensure long term safety, each NaviLED
®
Once the lamp has operated for a total time of 10,000 hours, the lamp activates 'Service Mode'.
Service Mode is indicated by the lamp flashing at a rate of 60 flashes per minute for 15 seconds as
soon as the lamp is switched on. This will occur for 15 seconds every time the lamp is switched on
until the unit has operated for another 2000 hours.
After 2000 hours the Service Mode flash rate doubles to 120 flashes per minute for 15 seconds as
soon as the lamp is switched on.
To ensure the lamp meets the light output criteria of its certification, Hella marine recommends the
light module be replaced as soon as it enters this 2000 hours Service Mode stage. By regular
recreational boating standards, even with regular night sailing, 'Service Mode' will hardly ever be
reached.
email: custservice@hella.com
PRO Bi-colour lamp is equipped with a timing circuit.
Designed and Manufactured in New Zealand
INSTRUCTION SHEET: NaviLED PRO 2 Nautical Mile Bi-Colour Navigation Lamp
®
2LT 959 941-xxx
for:
Hella marine LED navigation lamps offer many advantages over conventional bulb lamps.
Significantly reduced power consumption, ultra long life and high tolerance to shock and vibration
make the LED lamps the ideal choice for the harsh marine environment.
The Hella marine NaviLED ® PRO series are precision optical instruments, tested and type approved
to comply with international maritime regulations. They are covered by a 5 year warranty.
Material Description UV resistant lens, high impact shroud
Minimum Visible Distance 2 Nautical Miles
Cable Pre-wired with 2.5m of twin core marine cable
Operating Voltage
Multivolt
Voltage Protection Spike protected to +500 volts
Reverse polarity protected to -700 volts
Power Consumption Less than 2W (0.14A @ 12V / 0.08A @ 24V)
Degree of Protection IP 67 – Completely sealed
Weight 150g (including cable)
International Approval IMO COL REG/USCG 33 CFR 183.810 2NM
Dimensions
c c a a
c a
Electromagnetic Compatibility (EMC)
This LED lamp is an electronic device. The electrical circuits contain components that suppress Dimensions Dimensions Dimensions
possible interference, both emission as well as susceptibility, to the limits prescribed in international
a = 87mm / 3.43" a = 87mm / 3.43"
a = 87mm / 3.43"
regulations.
b = 90mm / 3.54" b = 90mm / 3.54"
b = 90mm / 3.54"
c = 57mm / 2.25" c = 57mm / 2.25"
c = 57mm / 2.25"
Protection against damage due to voltage spikes
d = 50mm / 1.97" d = 50mm / 1.97"
d = 50mm / 1.97"
This lamp is protected against reverse polarity connection, positive voltage spikes up to +500 volts
and negative voltage spikes of up to 700 volts.
TM 9-33V DC
c a
Dimensions
a = 87mm / 3.43"
d
d d b b
b
b = 90mm / 3.54"
c = 57mm / 2.25"
d = 50mm / 1.97"
958 780-49 / 06.19