Power Supply; Gradients And Effects; Rollei Lumen App; Brightness And Colour Temperature - Rollei 600Bi Mode D'emploi

Power supply

• Use with power supply unit: Please plug the supplied power
supply unit into the mains socket and close the screw cap. Slide
the power switch to the "
• Use with rechargeable batteries: Please insert the (optionally
available, not included) rechargeable batteries into the battery
compartment and slide the power switch to the "
turn on the LED light.
• Note: Rechargeable batteries and charger are optionally
available from Rollei. For operation 2 lithium-ion batteries of
the type NP-F750/F970 are needed.

Brightness and colour temperature

Adjust the brightness:
• After turning on the power, briefly press the knob, so that
the „BRT" menu item is highlighted in the display, and turn it
clockwise to increase the brightness and counterclockwise to
decrease the brightness.
• The brightness can be adjusted between 0% and 100% in 1%
increments.
Adjust the colour temperature:
• Briefly press the rotary knob so that the „CCT" menu item is
highlighted in the display and turn the dial clockwise to in-
crease the colour temperature (white light) and counterclock-
wise to decrease the colour temperature (warm white).
• The colour temperature can be set between 3,200 K and 5,500 K in
steps of 100 K. The symbol to the right of the colour tempera-
ture describes the light which the colour tempera ture resembles
(from incandescent and fluorescent lamps to morning/evening
light and daylight).

Gradients and effects

(operation via app only)
You can choose between various effects with the Lumen Pro
Bi-Color.
To do this, connect the LED continuous light to the Rollei Lumen
App (see download link on the right) and select the "Styles"
section at the bottom right in the app. Please note that the
bi-color continuous light does not offer all effects listed in the
Lumen App but only the bi-color gradients with the headings
"Transition", "Strobe" and "Pulsing".
The speed of the gradients can also be adjusted via the app.
" symbol to turn on the LED light.
" symbol to

Rollei Lumen App

Download the "Rollei Lumen" app directly from the App Store or
the Google Play Store.
Connection with the smartphone
1. Activate Bluetooth * on your smartphone
®
2. Switch on the Rollei Lumen Panel
3. Open the "Rollei Lumen" app, the connection to your phone
will be established automatically.
Note:
• The connection is established using "Bluetooth Low Energy"
(BLE). For this, a location release of the app is required. The
connection to the LED light is established directly in the app.
Download on the

Barndoors

The barn doors allow the light to be focused and directed more
strongly. For transport, fold in the doors, first the upper and lower
ones, then the side ones.
9