Power Supply; Rollei Lumen App; Brightness And Colour Temperature; Barndoors - Rollei 600Bi Manuel

Masquer les pouces Voir aussi pour 600Bi:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

Power supply

• Use with power supply unit: Please plug the supplied power
supply unit into the mains socket and close the screw cap. Slide
the power switch to the "
• Use with rechargeable batteries: Please insert the (optionally
available, not included) rechargeable batteries into the battery
compartment and slide the power switch to the "
turn on the LED light.
• Note: Rechargeable batteries and charger are optionally
available from Rollei. 2 pieces Li-Ion (spare) Sony NP-F750/F970.

Brightness and colour temperature

Adjust the brightness:
• After turning on the power, briefly press the knob, so that
the „BRT" menu item is highlighted in the display, and turn it
clockwise to increase the brightness and counterclockwise to
decrease the brightness.
• The brightness can be adjusted between 0% and 100% in 1%
increments.
Adjust the colour temperature:
• Briefly press the rotary knob so that the „CCT" menu item is
highlighted in the display and turn the dial clockwise to in-
crease the colour temperature (white light) and counterclock-
wise to decrease the colour temperature (warm white).
• The colour temperature can be set between 3200 K and 5500
K in steps of 100 K. The symbol to the right of the colour tem-
perature describes the light which the colour tempera ture re-
sembles (from incandescent and fluorescent lamps to morning/
evening light and daylight).
" symbol to turn on the LED light.
" symbol to

Rollei Lumen APP

Download the "Rollei Lumen" app directly from the App Store or
the Google Play Store (iOS 9.0 or higher, Android 5.0 or higher)
Connection with the smartphone
1. Activate Bluetooth
* on your smartphone
®
2. Switch on the Rollei Lumen Panel
3. Open the "Rollei Lumen" app, the connection to your phone
will be established automatically.
Note:
• The connection is established using "Bluetooth Low Energy"
(BLE). For this, a location release of the app is required. The
connection to the LED light is established directly in the app.
Download on the

Barndoors

The barn doors allow the light to be focused and directed more
strongly. Please note that they are permanently installed and can­
not be removed. For transport, fold in the doors, first the upper
and lower ones, then the side ones.
*The Bluetooth
®
word mark and logos are registered trademarks of the Bluetooth SIG,
Inc. and any use of such marks by Rollei is under license. Other trademarks and trade
names are the property of their respective owners.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

900bi

Table des Matières