Opale-Paramodels Mike XL Mode D'emploi page 16

Attach the riser. Make sure that the buckle is well
taken in the riser holder
Position the base of the spinner
Place the pre-assembled propeller on it
Fit the washer and tighten the nut firmly.
Pass the propeller in the elastic and go up to the hub
O pal e - Pa ramo del s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
16
contact@opale-paramodels.com +33(0)981 144 387