Parrot PHOTO VIEWER 7 Guide Utilisateur page 8

• : Provides information on the software built into the Parrot PHOTO VIEWER 7'', the memory status and
the picture displayed.
Settings
The «Settings» menu can be accessed from the main menu.
Description of the Icons and Features
• : Returns to the main menu.
• : - Visibility: makes the Parrot PHOTO VIEWER 7'' visible or invisible to other Bluetooth devices.
- Frame name: for selecting the pre-recorded Bluetooth name by which the frame will be detected
by other Bluetooth devices.
- Advanced mode: for selecting a specific or standard pairing mode depending on the model of
your Bluetooth phone (for further information, visit the Support heading on our website at www.parrot.com).
• : Adjusts the brightness of the display. You can adjust the screen brightness using the «Select»
buttons on the back of the Parrot PHOTO VIEWER 7''; press the «Enter» button to confirm.
• : - Automatic: the screen's backlight level is controlled by an algorithm that uses a light sensor built into
the frame. This is the default setting.
- manual: the backlight is always on. Use the ON\OFF button on the power lead to enable the screensaver.
10
Parrot PHOTO VIEWER 7''