Common Problems - PNI SVM1000VA Manuel Utilisateur

Troubleshooting
In case of improper operation of the voltage stabilizer, before
calling a specialized service center, check the following:
• Check the stabilizer power cord and the power cord of the
device connected to the stabilizer.
• Check the starting power of the device connected to the
stabilizer. It is recommended that it does not exceed 80% of
the rated power of the stabilizer. If it exceeds this threshold
for a long time, it is recommended to increase the ventilation
capacity of the stabilizer.
• If there is a power outage while the stabilizer and consumers
are in operation, after the power returns, gradually connect
the consumers.

Common problems

Problem
The stabilizer
does not start
8 - User manual
Possible cause
Input error
Solution
Check the power
cables.
Check that the power
supply complies with
the stabilizer
requirements.