Usage Conditions; Technical Specifications - PNI SVM1000VA Manuel Utilisateur

Usage conditions

Voltage stabilizers are used only indoors, taking into account the
following requirements:
• Operating temperature: -26°C ~ +80°C
• Altitude: <1000 m above sea level
• Humidity: ≤ 90%
• There must be no gases, vapors, chemicals or explosives in
the workspace, excess dust, excess moisture.
• The surface on which the stabilizer is installed must be flat,
without vibrations.
• For installation in special conditions, ask for specialist advice.

Technical specifications

Model
AC input
Voltage range
Frequency
Phase
AC output
Voltage
Voltage
adjustment
accuracy
Waveform
Efficiency
6 - User manual
PNI SVM1000VA
Single phase +N + G
Sinusoid (identical to AC input)
PNI SVM2000VA
170Vac-260Vac
50/60Hz
230V
±3%
≥96%