Instruction Sheet - Swagman Race Ready Guide D'assemblage

1. How to change the rack from a Passenger side to Driver
side loading.
1
2. Using the supplied tool hold the insert and unscrew.
2
3. Using an Allen Key remove the two bolts holding the
ratchet arm assembly on.
3
4. Using an Allen Key remove the limiter bolt. Set ratchet
arm assembly aside.
4
Swagman • 300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
PRODUCT: 64705 Race Ready • Page 1 of 3

INSTRUCTION SHEET

5. Remove the two Allen bolts holding on the wheel cage.
Note: Do not lose the nuts on the backside.
5
6. Remove the Wheel cage.
6
7. Remove plastic spacer.
7
8. Remove the two wheel cage holders.
8
REV 05/20/20