Vision CS-1900 Manuel Du Produit page 3

EU DECLARATION OF CONFORMITY
THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSBILITY OF:
VISION
Part of TD Synnex
Redwood 2,
Chineham Business Park
Crockford Lane
Basingstoke
Hampshire
RG24 8WQ
United Kingdom
Product Identification: CS-1900
Country of Origin: China
THE PRODUCT MENTIONED IN THIS DECLARARTION ARE IN CONFORMITY WITH:
Harmonised standards EU RoHS Directive 2011/65/EU and its amendment directives (EU)2015/863
IEC 62321-3-1:2013
IEC 62321-5:2013
IEC 62321-4: 2013+AMD1:2017
IEC 62321-6:2015
IEC 62321-7-1: 2015
IEC 62321-7-2: 2017
IEC 62321-8: 2017
Electromagnetic Compatibility (EMC) 2014/30/EU
EN 55032: 2015+A11:2020
EN 55035: 2017+A11:2020
SIGNED FOR AND ON BEHALF OF VISION BY:
Stuart Lockhart
PLACE AND DATE OF ISSUE: UK 6 August 2021
th
Director
4
Compliance
Concerning CE, EMC, and LVD safety regulations, VISION products are certified and comply with all known local regulations.
VISION commits to ensure all products are fully compliant with all applicable certification standards for sale in participating
countries.
Concerning EU directive 2011/65/EU regarding "Restriction of use of certain Hazardous Substances in Electrical and Electronic
Equipment" (RoHS), this directive sets out that electrical components should not contain unsafe levels of dangerous chemical
compounds. All VISION products certifiably comply with RoHS regulations including the Commission Delegated Directive (EU)
2015/863 of 31 March 2015, amending Annex II to Directive 2011/65/EU as regards to the list of restricted substances, to include
phthalates. This product should be returned to the place of purchase at the end of its useful life for recycling.
WEEE Registration: GD0046SY
Concerning REACH restricted chemicals, VISION neither produces nor imports chemicals. Therefore, as Downstream User
we are under no obligation to provide safety data sheets. According to ongoing audits based on information provided by
our suppliers, our products contain no substances > 0.1 % by weight, included in the candidate list in accordance with Article
59 (1,10) of the REACH regulation. In order to guarantee product safety and to secure our supply chain, we require consistent
implementation of REACH by our suppliers. The assurance of REACH-conformity is part of our supplier qualification standards.
Declaration of origin
All VISION products are made in the People's Republic of China (PRC). VISION products are imported into the EU by
VISION who is wholly owned by 'TD Synnex.', Registered in England Nr. 04625566 at Redwood 2, Chineham Business Park,
Crockford Lane, Basingstoke, Hampshire, RG24 8WQ.
Lifetime return-to-base warranty
This product comes with a lifetime return to base warranty. If you have a problem, you are required to provide a DETAILED
DESCRIPTION of the fault. Some Vision products are very technical and require troubleshooting all elements of the installation
as it may not be the Vision product at fault. Because of this the manufacturer may refuse to replace the item if an adequate
description is not provided.
• This warranty applies only to the original purchaser and is not transferable.
• This warranty protects you against the following:
• Failure of any components, including the power supply
• Damage when the product is first removed from its packaging if reported within 24 hours of purchase.
• If the product is DOA (dead on arrival), you have 21 days from purchase date to notify the national distributor via your AV
reseller.
• The original purchaser is responsible for shipment of the product to the Vision's appointed service centre.
• The liability of Vision is limited to the cost of replacement of the faulty unit under warranty except for death or injury
(EU85/374/EEC).
• If the product is end of line (EOL) the Vision will provide a credit instead of replacement.
• This warranty does not protect this product against faults caused by abuse, misuse, incorrect installation, unstable or faulty
power input, or modification.
Vision aims to send a replacement item within 5 working days however this may not always be possible, in which case it will
be sent as soon as practicably possible. UK End users and resellers can request support at http://www.visionaudiovisual.com/
support
LEGAL DISCLAIMER: Because we are committed to improving our products, the details above may change without prior
warning. This User Manual is published without warranty and any improvements or changes to the User Manual necessitated
by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made
at any time and without notice. Such changes will be incorporated into new editions of the User Manual.
5