Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Lower exhaust– Using an exhaust hanger removal tool, lower exhaust muffler by removing (2) rearmost rubber hangers, per side. A spray of lubricant
or soapy water on rubber hangers makes them slide off metal pins more easily. NOTE: Be sure that exhaust is properly supported before removing
rubber hangers.
Screw
Rivets
Screws
2. Remove heat shield – Using 10 mm socket remove (4) bolts from each heat shield, per side. Remove heat shields.
Screw
©2021 Horizon Global™ Corp - Printed in Mexico
Sheet 4 of 18
25003NP
10-18-21
Rev. A
Publicité
Table des Matières
