Thuraya XT-PRO Mode D'emploi page 13

Using your Thuraya XT-PRO
Data services via the XT-PRO
Use data services by setting up your XT-PRO as a data modem.
Choose either GmPRS (up to 60/15 kbps download/upload) or
Circuit Switched Data (9.6 kbps):
Download the latest Thuraya XT-PRO Upgrader program (this can
be found on the included CD or on the Thuraya website), which also
contains the required driver for connecting your XT-PRO to a PC or
laptop to use data in satellite mode.
Step 1
Run the setup le - the Upgrader program including the USB
driver will be installed.
Step 2
Connect your Thuraya XT-PRO with the PC/laptop via the USB
data cable and set the phone up as a data modem.
Step 3
Create a dial-up connection and in the dial-up phone number
eld, enter the access number *99# for GmPRS or 1722 for Circuit
Switched Data.
For detailed instructions on step 2 and 3 please refer to the
'Connect your XT-PRO' manual on the CD or on the Thuraya
website.
Access Point Name (APN)
There are 3 Thuraya APNs available, to change the default
setting, go to Menu > Settings > GmPRS > APN:
GET (default, no compression)
GETLC (low compression, images will be compressed)
GETHC (high compression, images will not be downloaded)
GETLC and GETHC are designed to compress all http tra c that
is routed through them. Any emails and apps that do not use
http will be delivered uncompressed.
User Guide I English I Page 9