Fun Chinook
Order No 4289
Fitting the dry cells
• Remove the battery compartment cover.
• Place six AA-size alkaline dry cells in the compartment, taking care to maintain correct
polarity.
• Install the battery compartment cover back into place.
Charging the flight battery
The charge process takes about 30 to 45 minutes for about 5 minutes of flight time!
• Move the main switch on the model to the "OFF" position.
• Carefully connect the charge plug on the end of the lead to the charge socket on the
underside of the model.
• Connect the plug-type battery charger to a mains socket.
• The LED at the charger lights up red to indicate that the flight battery is on charge; when it is
fully charged and ready for use the LED glows green.
• Now disconnect the charge lead plug from the model, and remove the battery charger from
the mains socket.
Caution: The power LED at the transmitter glows permanently when the power supply is
sufficient. When it begins to blink, the batteries are empty and should be replaced.
12