Manual Operation - Breville Commercial The Super Q Pro Manuel D'instructions

MANUAL OPERATION

Speed Control Dial
Turn the Speed Control Dial clockwise
to select one of 12 speed settings from a
slow STIR through to a very fast MILL.
To stop blending, turn the Speed Control
Dial counterclockwise back to READY.
The blender is programmed to allow manual
speeds to run for a total of 6 minutes
(68-ounce Jug).
WARNING
Never blend boiling hot liquids.
Allow temperature of ingredients
to cool down to room temperature
before placing into blender jug.
PRESET PROGRAMS
PULSE | ICE CRUSH
A program of continuous pulsing
designed to chop food into an even
consistency or crush ice cubes.
SMOOTHIE
For dairy-based smoothies. A combination
of speeds and pulses designed to
combine and aerate ingredients into
a smooth and creamy texture.
STIR
This program bypasses the intermittent
start / stop feature of the low speed manual
blending. It is designed for constant low
speed blending when making emulsifications
or working with low volumes of liquid.
BOOST
A one-touch program to reach
maximum speed quickly and blend
the contents to a fine consistency.
Use the tamper for best results.
A BIT MORE™
The A BIT MORE™ program is designed to
produce a slightly finer texture across chunky
mixtures and fine blends or to incorporate
seasoning after tasting without over-blending.
TIMER
A precision speed control dial allows the
user to set the perfect blending speed
in conjunction with a built in 6-minute
timer that will auto-stop the blend.
CLEAN
Use to remove most of the ingredients off the
blender walls and blades. Add 4 cups of warm
soapy water to the blender jug and press the
CLEAN button. For harder to clean, sticky or
thick ingredients, add ½ teaspoon of liquid
dish detergent for extra cleaning power. For
best results, clean the blender jug this way
immediately after use.
NOTE
If the blender is running and you press
a different preset button, it will switch
to that program without stopping. If a
program is running and you press the
same program button again, it will pause
that program and timer. To resume press
the same program button again.
11