Eterna RONDA 6004.B Mode D'emploi page 6

2.2 SETTING THE TIME
CROWN
To set the time, pull the crown
C. Turn the crown clockwise or anti-clockwise to position
the hands to the desired time. When the hour hand passes
the 12 o'clock position, you will see whether it is indicating
midnight (the date changes) or midday (the date does not
change). Check that the date set previously has not changed.
Once the setting is complete, push the crown back in against
the case to the rest position A. The hands will restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position
when the central seconds hand
o'clock, and pushing it back in in synchronisation
with an official time signal.
2.3 RAPID DATE CORRECTION
CROWN
Pull the crown
clockwise until the correct date appears in the window
4. Then push the crown
rest position A.
5 PULLED OUT TO POSITION
5 PULLED OUT TO INTERMEDIATE POSITION
5 out one notch to position B. Turn it
5 back in against the case to the
5 out two notches to position
3 is at precisely 12
5 5
C
C
B