Pleasant Hearth PH20D-C Instructions De Montage page 5

ASSEMBLY INSTRUCTIONS
7. Insert 3 dowels (CC) into pre-drilled holes
along back edge of top panel (A). Slip corner
panel (J) over dowels (CC) until snug. Secure
with bolts (AA) and washers (BB) through
predrilled holes as illustrated.
8. Align predrilled hole in glue block on
underside of corner panel (J) with predrilled
hole in corner support (K) and secure with
washer (BB) and bolt (AA) inserted through
pre-drilled holes as illustrated. Tighten with
screwdriver.
9. Set completed mantel in desired position in
room corner.
7
8
9
5
J
CC
AA
BB
BB
AA