Pleasant Hearth PH20D-C Instructions De Montage page 3

ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Attach corner support (K) to base (B) with
bolt (AA) and washer (BB) through predrilled
holes as illustrated.
2. Attach left pilaster (F) to left side panel (C)
by securing from the back with washers (BB)
and bolts (AA) inserted through pre-drilled
holes as illustrated. Tighten with screwdriver.
Repeat using right pilaster (G) and right side
panel (D).
3. Insert 4 dowels (CC) into pre-drilled holes in
front panel (H). Slip left side panel assembly
over dowels (CC) on the left side of front panel
(H). Slip right side panel assembly over dowels
(CC) on the right side of front panel (H). Make
sure both panels are snug, then secure with
washers (BB) and bolts (AA) inserted through
pre-drilled holes as illustrated. Tighten with
screwdriver.
1
K
B
2
D
G
3
E
AA
3
BB
BB
C
F
CC
BB
AA
AA