Parts Description - TurboTronic TT-002 Mode D'emploi

PARTS DESCRIPTION

1 Motor Unit
Speeds Selector
2
3 Locking Bar
Accessories Outlet
4
5 Mixing bowl
USING THE MIXING BOWL
1. Press down the Locking Bar to lift up the arm.
Place the mixing bowl into the housing and turn the
2.
3. Inserting the Bowl Lid and then
Accessory is inserted well.
4. Now fill in your ingredients through the Bowl Lid
5. Press the Locking Bar
6. Turn Speeds Selector to start the machine and set the right speed.
7. After operation, turn the Speeds Selector back to "0" position to stop machine. Then remove the mains
plug.
8. Press the Locking Bar
then remove mixing bowl ,
9. The mixture can now be released with the help of a spatula and removed from the mixing bowl.
10. Clean the parts as described under "Cleaning"
How to assemble / disassemble Accessory
Ⅰ) Bowl lid
6
7
8
9
Kneading hook / Stirrer beater / Whisk
down again and in the same time press down the arm to lock into body unit
down again to disassemble
Accessory - Bowl Lid
Accessory - Kneading hook
Accessory - Stirrer beater
Accessory - Whisk
bowl until it locks into place.
.
Kneading hook / Stirrer beater / Whisk
3
into Accessories Outlet. Sure the
, Bowl Lid, and