Installing The Shoulder Strap - Chapin TREE PRO Manuel D'utilisation Et D'entretien

INSTALLING THE PUMP HANDLE
The pump handle can be mounted on either side of the pump shaft (A). To
install the pump handle place the handle (C) over the shaft (A) aligning the
pump handle holes and shaft holes. Slide the bolts (B) through the aligned
holes as shown in figure 3. Tighten nuts (D) to bolts. There are holes in the
pump handle to allow for either left (fig.2-4) or right (fig.5) hand mounting.
Nylon Lock Nut
Threaded Bolt
Figure 1
Figure 4
Tighten nut to bolt

INSTALLING THE SHOULDER STRAP

The backpack strap is provided with multiple
features including shoulder strap, chest strap,
waist belt and lumbar support. (figure 1). The
top the shoulder strap is attached to the top of
the tank and is removable. The hook from the
lumbar support attaches to the base tube on
the bottom of the tank (figure 2).
Chapin Backpack Sprayer Operator's Manual - English
Pump
Handle
Figure 2
Line up holes
Figure 5
Right Hand
Figure 1
Strap Assembly
3E
A. Pump Shaft
Pump
Shaft
Figure 3
Slide bolts through holes
Completed Assembly
Shoulder
Strap
Chest
Strap
Lumbar
Support
Waist
Figure 2
Belt
Hook Attachment
D. Nuts
B. Bolts
C. Pump Handle
Hook
Lumbar
Support
Base
Tube