Chapin TREE PRO Manuel D'utilisation Et D'entretien page 3

APPLICATIONS & USE FOR YOUR SPRAYER
Avoid using a sprayer for general cleaning purposes if plant protection or herbicide chemicals have already been used
in the sprayer. If a sprayer has been used for plant protection or as an herbicide, clean the sprayer completely (see
cleaning section) before using.
Plant Food: Use different spray patterns for optimum foliage feeding or for fungicide and pesticide application.
Herbicides: Reduce weeds and unwanted plants but avoid using the same sprayer for plant feeding or protection
without thoroughly cleaning (see cleaning section) the sprayer first.
General Household Use: Apply detergents, cleaning solutions, warm water (do not exceed 120°F/49°C) or nontoxic
household cleaning chemicals for carpets, floors, walls, glass, counter tops and ceilings. DO NOT use sprayer that has
been used with herbicides, pesticides or other toxic chemicals for household applications.
General Outdoor Use: Use the sprayer for cleaning windows or with a detergent for general purpose cleaning.
SPRAYER COMPONENTS & USE INFORMATION
NOZZLE ASSEMBLY
Figure 1-3
Unscrew the nozzle cap (1) from the nozzle body (3) with retaining nut (2) fastened tightly to the elbow (5). Unscrew
the retaining nut (2). Push the nozzle body (3) with the nozzle gasket (4) out of the retaining nut (2). To reinstall the
nozzle, reverse the above instructions.
Figure 4
Unscrew the retaining nut from the elbow and push the fan nozzle tip and gasket out of the retaining nut. To reinstall
the nozzle, reverse the above instructions.
1. Poly
Nozzle Cap
2. Retaining
Nut
3. Nozzle
Body
4. Nozzle
Gasket
5. Elbow
Figure 1
Adjustable Poly
WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
Retaining
1. Brass
Nozzle Cap
2. Retaining
Nut
4. Nozzle
Gasket
5. Elbow
Nozzle
Wand
Nut
Chapin Backpack Sprayer Operator's Manual - English
1. Brass
Nozzle Cap
3. Nozzle
Body
4. Nozzle
Figure 2
Adjustable Brass
Nozzle
O-ring
2E
2. Retaining
Nut
3. Nozzle
Body
Gasket
5. Elbow
Figure 3
Extended Reach
Brass Nozzle
Shut-off
Valve
Retaining Nut
Fan Nozzle Tip
Nozzle
Gasket
Elbow
Figure 4
Fan Nozzle