Warming Function; Cleaning And Maintenance; Technical Data - Black & Decker RPC1800 Mode D'emploi

ENGLISH
Steaming function
• Put the water into the inner pot, place
the pasta basket into the Inner pot, then
place steaming plate onto the pasta
basket. Place raw food for cooking on
the Steaming plate. Do not exceed the
max capacity.
• Close the lid.
• Select the 'Smart Steam' function.
• Press 'Start/Stop' key to start the unit.
• The steam mode will cook the food for 2
hours maximum or until the water dies
out and will automatically switch to
'Keep warm' mode.

Warming function

The 'Keep warm' mode lasts 3 hours max,
then the unit will stop automatically and
come back to Standby mode.

Cleaning and maintenance

Warning! Before cleaning and maintenance,
switch the appliance off and remove the
plug from the socket.
• Do not immerse appliance, cord set or
plug in liquids.
• Never use diluent or benzene, chemical
wiping cloths, plastic brush or metal
brush.
• Put the pot and the lid into water, use a
sponge to, clean them, and wipe them
dry.
Note: Be sure to clean the inner pot entirely
after using salt for cooking, otherwise it
may cause corrosion.
• Handle the inner pot with care, never
deform it.
• External surfaces should be cleaned with
a damp cloth & thoroughly dried before
re-use.
• Wash removable parts with mild
detergent, rinse thoroughly.
6
All manuals and user guides at all-guides.com
(Original instructions)
• Rinse thoroughly after cleaning.
• Keep the power cord, control panel clean
and dry, otherwise it may cause
problems.
• Clean the heating plate and temperature
limiting component with a well-wrung
wet cloth.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
terminal in the new plug.
• Connect the blue lead to the neutral
terminal.
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal
Note! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal. Follow the fitting instructions
supplied with good quality plugs. Any
replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Warning! The above section on mains plug
replacement is for authorized service centre
persons.

Technical data

Input voltage
Power input
Weight
RPC1800
V 220-240
AC
W 588-700
kg 3