Publicité
19
19
Roller end
1
2
3
Insert a SLIDE CAM (10A) into the LOWER DRAWER SIDES (D30 and D31).
Fasten a DRAWER RIGHT (35GC) to the LOWER RIGHT DRAWER SIDE (D30) and a DRAWER LEFT (35GD) to the LOWER
LEFT DRAWER SIDE (D31). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Repeat this step for the other drawers.
414942
10A
D31
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
www.sauder.com/services
Screw head - turn CAM to line up holes in
SLIDES with holes in DRAWER SIDES.
10A
D30
2
3
3S
Roller end
1
Page 23
Publicité
