Publicité
13
13
BLACK 1-1/8" PAN HEAD SCREW
(6 used for the BOTTOM MOLDING)
Rounded edge
Y
23F
First, fasten the SKIRT (U) to the BOTTOM MOLDING (T). Use three BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Then, fasten the BOTTOM MOLDING (T) to the BOTTOM (G). Use six BLACK 1-1/8" PAN HEAD SCREWS (9S).
Carefully turn two FOOT SCREWS (23F) a few turns into the BOTTOM MOLDING (T).
Next, turn a FOOT (Y) onto the other end of each FOOT SCREW (23F). Turn the FEET clockwise until the FOOT SCREW is tight in
the BOTTOM MOLDING (T) and each FOOT.
NOTE: Do not overtighten the FOOT SCREWS.
414942
9S
T
Rounded edge
Flat surface
www.sauder.com/services
Y
BLACK 1-7/8" FLAT HEAD SCREW
U
U
T
Unfi nished
surface
2S
(3 used for the SKIRT)
Page 17
Publicité
