Publicité
18
18
The tabs should insert freely into the slots.
1
Gently tilt the DRAWER SIDES side to
side until the tabs slip into the slots.
D30
Groove
Insert the LOWER DRAWER SIDES (D30 and D31) at an angle
into the slot at each end of the LOWER DRAWER FRONT (P).
3
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (W) to the LOWER DRAWER
FRONT (P). Tighten one HIDDEN CAM.
Page 22
P
D31
Maximum
Arrow
210 degrees
Minimum
190 degrees
W
P
www.sauder.com/services
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
2
U N
F I
D30
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the LOWER DRAWER BOTTOM (D974) into the grooves
in the LOWER DRAWER SIDES (D30 and D31) and LOWER
DRAWER FRONT (P).
Start each screw a few turns before
4
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D167
D30
W
Fasten the LOWER DRAWER BACK (D167) to the LOWER
DRAWER SIDES (D30 and D31) and DRAWER BRACE (W).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Repeat this step for the other drawers. The drawers will use DRAWER
FRONTS (M and N), DRAWER SIDES (D24 and D25), DRAWER
BACKS (D170), and DRAWER BOTTOM (D945). The upper
drawer will use UPPER DRAWER FRONT (O), UPPER DRAWER
SIDES (D12 and D13), UPPER DRAWER BACK (D166), and the
remaining LOWER DRAWER BOTTOM (D974).
D974
N I
S H
E D
P
D31
30S
(20 used in this step)
D31
414942
Publicité
