Publicité
Les langues disponibles
Les langues disponibles
English
User Guide and Maintenance
Dispensing Water
Cold Water
Once you have turned the cooling switch (#14) into the on (I) position it will take initially
1 hour for the water to cool. During this time the cooling indicator light (#3) above the
cold water icon will be steady. During this time the compressor could run continuously.
This is normal. The light will be turned off when the cooling process is complete.
1. Position a bottle, glass, pitcher or cooking pot below the water spout (#10).
2. Depress the cold water push button (#8) downward to begin the flow of water.
3. Once the desired fill level is achieved release the cold water push button (#8).
Cool Water
1. Position the bottle, glass, pitcher or cooking pot below the water spout (#10).
2. Depress the cool water push button (#7) downward to begin the flow of water.
3. Once the desired fill level is achieved release the cool water push button (#7).
Hot Water
Once you have turned the heating switch (#15) into the on (I) position it will take
initially 15 – 20 minutes for the water to heat up. During this time the heating
indicator light (#2) above the hot water icon will be steady. The light will be
turned off when the heating process is complete.
1. Position a bottle, glass, pitcher or cooking pot below the water spout (#10).
2. Slide the red child safety lock (#6) to the left and depress the hot water push button
(#5) downward to begin the flow of water. You must hold the child safety lock (#6)
and push the button at the same time.
3. Once the desired fill level is achieved release the hot water push button (#5).
14
Publicité
