Troubleshooting - JVC KD-SD631 Manuel D'instructions

Troubleshooting

Symptom
General
No sound, sound interrupted or
static noise.
"MISWIRING CHK WIRING THEN
RESET UNIT"/"WARNING CHK
WIRING THEN RESET UNIT"
appears on the display and no
operations can be done.
The unit does not work at all.
Source cannot be selected.
The correct characters are not
displayed (e.g. album name).
FM/AM
SSM automatic presetting does
not work.
CD/USB/SD/iPod/iPhone
"PLEASE" and "EJECT" appear
alternately on the display.
"IN DISC" appears on the display.
"READING" keeps flashing on the
display.
Tracks/folders are not played
back in the order you have
intended.
The elapsed playing time is not
correct.
"NOT SUPPORT" appears on the
display and track skips.
"CANNOT PLAY" flashes on
the display.
The unit cannot detect the
connected device.
The iPod/iPhone does not turn
on or does not work.
Check the cords, aerial and cable connections.
Check the condition of the disc, connected device and
recorded tracks.
Ensure the terminals of the speaker leads are properly insulated
with tape before resetting the unit. (
If the message does not disappear, consult your JVC car audio
dealer or kits supplying company.
Reset the unit. ( page 3)
Check the <SRC SELECT> setting. (
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
Store stations manually.
Press [ ], then insert the disc correctly.
The disc cannot be ejected properly. Make sure nothing is
blocking the loading slot.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
Reload the disc or reattach the USB device.
The playback order is determined by the file name (USB/SD) or
the order in which files were recorded (disc).
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
Check whether the track is a playable file format.
Check whether the connected device is compatible with this
unit. (USB: page 20) (SD:
page 18)
Ensure that the device contains files in the supported
formats. ( page 17)
Reattach the device.
Check the connection between this unit and iPod/iPhone.
Detach and reset the iPod/iPhone using hard reset. For
details on resetting the iPod/iPhone, refer to the instruction
manual supplied with the iPod/iPhone.
Check whether <IPOD SWITCH> setting is appropriate.
( page 10)
Troubleshooting
Remedy/Cause
page 3)
page 16)
page 21) (iPod/iPhone:
19
ENGLISH |