Certification - WINDTECH WINDSOS CUBE 100 Manuel

7
Volume----3050ccm
(24*22*9 cm)
Sink rate at max. load 5,3 m/s
120
WINDSOs cube
Area --- 32,5 m2
Weight ---- 1.490 gr.
lines height--750 CMS
Max.total weight in flight EN / LTF -120 k
Min. total weight in flight EN /LTF--70 K
Volume----3408 ccm (24*22*11)
Sink rate at max. load 5,3 m/s
> certification
The has been certified according to the EN12491 standard.Therefore, it is
WINDSOs cube
a guarantee for the user, both at the level of aerodynamic behavior, as at the level of
structural resistance.In these tests the opening, the stability, the rate of fall (this will
never be higher than 5.5 m/s) and its structural resistance are quantified.
SPEED WARNING. NOT SUITABLE OF USE IN EXCESS OF 32 M/S (If strenght test
5.3.5.1 has been passed, which is the case). In case strength test 5.3.5.2 was passed
it is not suitable for speed in excess of 49 m/s. The parachute is loaded with a Dummy
with which the maximum load in flight of the set is reached. Through a protocol and the
use of a helicopter in flight at a high speed, a maximum impact is achieved, at the
moment of opening at a high speed. No breakage or sign of deterioration should show
the parachute after the whole process.
Deployment system warning: This parachute has been tested and found compliant
using the original manufacturer's inner container. Use of any other inner container
may produce different results, including failures. The speed of opening and opening
schock test has been completed using the inner container supplied. Use of any other