Corsair T1 RACE Mode D'emploi page 7

T1 RACE Assembly Instructions
WARNING: This furniture contains small parts that present a choking
hazard for children under 3 years of age. These parts are for adult
assembly only and should be permanently affixed to the furniture.
Any unused parts should be stored or discarded properly.
1. Insert chair wheels into chair
base by pressing the stud
firmly into the hole on the
bottom of the base.
3 3 3
2. Install the gas lift and gas lift
cover into the top of the chair
base by placing the larger end
into the hole in the center of the
chair base.
A. Place the gas lift cover over the
gas lift with the larger opening
facing down.
B. Remove the red protective cover
from the top of the gas lift.
C. WARNING: The seat height
adjustment will not function if the
red protective cap is not removed
from the gas lift.