Eu Certificate Of Conformity - Brill 2000 ESK Mode D'emploi

Warranty
The manufacturer warrants its
products for exclusively non-
commercial use for a period of
24 months from the date of
original purchase. This warranty
does not affect statutory warranty
claims. The warranty covers all
substantial faults of the product,
which are caused by defects in
material and workmanship. If a
product exhibits such a defect
we will, at our option, repair or
replace it without cost for parts
and labour provided the follow-
ing requirements are fulfilled:
The product must have
.
been sold to the customer in
a legally correct way.
The original receipt with the
.
customer's address, date of
purchase, model and product
designation is presented as
proof of purchase. The product
must have been purchased
within the EC.

EU Certificate of Conformity

The undersigned
BRILL Gartengeräte GmbH, Därmannsbusch 7, D-58456 Witten
hereby certifies that, when leaving our factory, the units indicated below are in accordance with the
harmonised EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the units are modified without our approval.
Description of the units :
Shredder
Types :
2000 ESK / 2300 ESK
Art. no.:
78045 / 78055
EU directives :
Machinery Directive 98 / 37 EC
Low Voltage Directive
73 / 23 EC
Electromagnetic Compatibility
89 / 336 EC
Directive 93 / 68 EC
Directive 2000 /14 EC
The product was handled
.
properly and according to
the recommendations in the
operating instructions. It is
essential that the product has
been maintained and cleaned
according to the information in
the operating instructions.
No attempt to disassemble or
repair the product has been
made by either the buyer or an
unauthorized third party.
It must be ensured that only
.
original replacement parts and
original accessories approved
by the manufacturer are used.
There may be an increased
risk of consequential damage
and accidents if non-original
parts or non-original acces-
sories are used. This warranty
does not cover consequential
damages.
The product must be either
.
taken directly or sent with
Harmonised
European standards :
EN 292 -1
EN 292 - 2
EN 294
EN 55014 - 1
EN 55014 - 2
EN 61000 - 3 -2
EN 61000 - 3 -3
EN 60335 -1
Measured
sound-power level :
2000 ESK 99,0 dB (A)
2300 ESK 99,1 dB (A)
postage paid to an authorised
service centre. The original
receipt must be sent with the
product.
The warranty does not cover
.
damage from misuse, abuse,
use of unsuitable, non-original
or unauthorised interchange-
able parts, replacement parts
or accessories, as well as
improper maintenance and
cleaning.
The products contain various
components that are subject to
normal or use-related wear.
The warranty does not extend to
these wearing parts. In particular
the following components rela-
ting to this product are excluded:
blade cylinder / cutting plate.
The manufacturer warranty
does not affect existing warranty
claims between the customer
and the dealer / seller.
Guaranteed
sound-power level :
2000 ESK 100 dB (A)
2300 ESK 100 dB (A)
Year of CE marking :
1996
Witten, 12.12.2002
Edgar Heilmann
Geschäftsführer
GB
21