Cleaning And Maintenance; Technical Specifications - cecotec TitanGlass 1000 Manuel D'instructions

ENGLISH
2. Put the ingredients you want to process into the bowl.
3. Close the lid of the bowl and put the main body of the appliance onto it. Rotate the main
body until it locks into place. The motor will not work, unless it is properly installed.
4. Plug the appliance to the mains supply and press the power button to process the foods-
tuffs.
5. Once finished, unplug the appliance and take out the foodstuffs.

4. CLEANING AND MAINTENANCE

• Unplug the appliance and detach its accessories before cleaning or storing it.
• Wipe the main body with a wet cloth; do not immerse it in water.
• Wash all non-electrical components with warm soapy water.
• If food is not easily rinsed off the blades, pour water and a drop of dish soap in the bowl,
plug in the appliance, and press the power button for about 10 seconds. Unplug, rinse under
running water, and dry thoroughly.
• There is space between the main body and the connection with the blades to store the power
cord.
• Store the appliance in a clean, dry place when not in use. Make sure the appliance is clean
and dry, and unplugged from the power supply.
CAUTION: The cutting edges of the blades are very sharp, clean them carefully

5. TECHNICAL SPECIFICATIONS

Product reference: 03043
Power: 400 W
Voltage and frequency: 220-240 V ~ 50-60 Hz
Continuous use operation: 15 seconds
Made in P.R.C. | Designed in Spain
TITANGLASS 1000 13