Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Helpful Symbols
WARNING Symbol - Will alert you to the
possibility of damage, injury or death if you do
not comply with the warnings that accompany
them. The hazard may come from something
mechanical or from electrical shock.
Safety Information
WARNING: Risk of electric shock – This
product has not been approved for use in
swimming pool or marine areas.
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only, using the
following guidelines:
(A) Have a qualified electrician install a properly
grounded receptacle outlet, acceptable for outdoor
use and protected from snow and rain.
(B) Inspect cord before using.
Electrical Specifications
AquaSurge 2000 Pond Pump
• Input Voltage: 120V AC
Quick Step Guide
1
Select your location
6
Install underlayment
and liner
4
• Input frequency: 60 Hz
2
Position basin and
Excavate the area
outline area
7
Build waterfall
Waterfall Spillway
TIP Symbol - Helpful information provided by a
professional water feature installer.
(C) Do not use extension cords.
(D) Any wiring should be performed by a qualified
electrician to ensure code compliance and user
safety.
(E) Unplug pump at receptacle outlet when not in use
or before removal from water.
(F) To reduce risk of electrical shock, all wiring and
junction connections should be made per local
codes. Requirements may vary depending on usage
and location.
(G) The power cable should be protected at all times to
avoid punctures, cuts, bruises, and abrasions.
(H) Never handle power cords with wet hands.
(I)
Do not remove cord and strain relief. Do not
connect conduit to pump.
(J) Do not use power cable to lift pump.
3
Install and level basin
8
Install
☎
☎
US (866) 877-6637 |
• 160 Watts
4
Install plumbing
9
Fill basin
CAN (866) 766-3426 | aquascapeinc.com
5
10
Enjoy!
Publicité
Table des Matières
