WAGNER W 180 P Mode D'emploi page 15

W 180P
Malfunction
Spray gun buzzes and does
not work
Spray gun does not suck in
Spray gun sucks in but does Nozzle clogged
not spray
Spray gun works but sprays Spray material in container running
unevenly
Important Note Regarding Product Liability!
Using other accessories and spare parts can lead to partial or total loss of liability and
guarantee claims. With original WAGNER accessories and spare parts, you have the
guarantee that all safety regulations are fulfilled.
All manuals and user guides at all-guides.com
Cause
Piston stuck
Defective drive
No valve in the pump
Suction tube loose in the conical
bore
Venting hole in pump housing
clogged
Intake hole (fitting) in pump
housing logged
Viscosity of spray material too high
Ducts and holes in atomiser clogged
out
Spray gun held inclined leading to
sucking in of air
Viscosity of spray material too high
(too thick)
Fine adjustment button not set
correctly
Wrong nozzle size
Nozzle worn out
Valve worn out
Wrong valve inserted
Correction
Disassemble pump and
clean with thinner
Send spray gun to customer
service center
Insert valve
Adjust suction tube
Clean
Clean
Thin accordingly
Clean
Clean
Refill
Use flexible nozzle
extension (see accessories)
Dilute accordingly
Reset according to spray
material
Change nozzle
Replace
Replace
Use correct valve
GB
11