Qstarz BT-Q1000XT Guide D'installation Rapide page 8

English
...................................................................................................................................................
.............................................................
After complete pairing with BT-Q1000XT, please click
"Serial Port" to confirm the assigned COM port. If you use
PDA/PC to pair the GPS Receiver, please check
"Outbound COM port".
H-4 Set correct Serial Port in your map software
Activate your navigation software and make sure to
select the correct "Serial Port".
H-5 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then
the Bluetooth connection will be disconnected
automatically. Then put BT-Q1000XT switch to "OFF"
position.
I. Switch to eXtreme 5Hz sport mode by
QstarzGpsView software application
eXtreme 5Hz sport mode allows your GPS to get the same
or even higher positioning and accuracy ability during
eXtreme sports.
I-1 Connect BT-Q1000XT with your PC and turn it on.
I-2 Execute QstarzGpsView.exe from Driver CD
"Tools\QstarzGpsView.exe". Select COM port and set the
baud rate to
connection.
I-3 Click "Setup" tab, and you can change to eXtreme
Sport mode under Fix Update Rate. The higher number
means the device can bear extremer environment. After
select an update rate, click "Set" to save the setting.
NOTE: The default setting for Q1000XT is 1Hz. If you are no
longer to use eXtreme 5Hz sport mode, either to
switch it from software or to hard reset the GPS by
unplugging the battery for 5 mins.
................................................................................................................................................................................
.........
8
115200
. Then click "On" to make
www.Qstarz.com