Daan Tech Bob le mini lave-vaisselle 2020 Mode D'emploi page 4

1 | QUICK SET-UP GUIDE
1 | S
ETTINGS AND LOCATIONS FOR USE
1.1 | Potential applications
When you receive your Bob, humidity inside is normal. This is residual water from being tested
before shipment (empty cycle with clean water)
1.2 | Locations for use
You can put Bob anywhere you want, but here are some guidelines.
O
The shelf should be able to withstand a weight of 55.1 lbs (25kg) (weight of Bob + water + dishes).
O
The provided water outlet's length is 4'11" (1.5m)
Put Bob on a water-resistant surface to avoid stains. When fi lling Bob's water tank or taking
out dishes, water droplets may end up on the work surface.
During a cycle, ensure that nothing hinders the automatic opening of the door at the
completion of the program, or proper drying won't occur..
Warning : In the long run, the steam released while drying may damage wooden surfaces.
2
Warning: Bob's inclination should not exceed 2° in order
to avoid possible fl ooding.
Precautions against frost: Bob should not be stored in
a place with a temperature lower than 0°C / 32°F. If this
situation could occur, ensure that Bob has been drained
using the draining program within the settings menu
(refer to page 13) and remove the inlet water hose.
3 options
Bob's 4 feet can be adjusted up
to +1cm (+0,4in) to ensure it is in a
perfectly horizontal position.