Drive Medical RTLREB18DDA-SF Instructions De Montage page 2

1. Remove all contents from the carton. Unfold the wheelchair frame by pulling
outward on sides of frame until fully opened.
2. The Rebel Wheelchair is shipped with the back in the folded down position. Pull
upwards on the back upholstery until the back locks into position. Be sure the
back is securely locked before sitting in the wheelchair.
3. Insert the arm of the wheelchair into the frame receptacle as shown in figure A.
Repeat for the other arm.
4. Insert the front casters by depressing the spring loaded pin on the shaft of the
caster and slide into the frame of the wheelchair. An audible "click" will be heard
when secure (figure B).
assembly instructions
Figure A
Figure B